| Standard Mecho ® /5 Edge Clearances
For Lift-Assist Mechanism Upgrades: increase the Edge Clearance, ShadeCloth Deduct and Tube Deduct by 1/8" (3mm) on the Idle-End only. For shades with a width to height ratio greater than a 1:3 Ratio add the following to the Edge Clearance and ShadeCloth Deduct:
- Greater than a 1:3 Ratio: add 1/8” (3mm)
- Greater than a 1:4 Ratio: add 1/4” (6mm).
- Greater than a 1:5 Ratio: add 1/2” (13mm)
- Greater than a 1:6 Ratio: add 5/8” (13mm)
For Drive or Idle-End Brackets that come in contact with a surface: reduce the ratio increase by one-half. |
