Standard Electro ® /1 and 2 Edge Clearances for 5" to 10" Diameter Tubes
Check with your MechoShade Technical Representative. Edge Clearances are approximate. Subject to MechoShade approval for width, height and environmental conditions.
For RTS Motor Upgrades: increase the Edge Clearance, ShadeCloth Deduct and Tube Deduct by 3/16" (5mm) on the Drive-End only.
For shades with a width to height ratio greater than a 1:3 Ratio add the following to the Edge
Clearance and ShadeCloth Deduct:
- Greater than a 1:3 Ratio: add 1/8" (3mm)
- Greater than a 1:4 Ratio: add 1/4" (6mm).
- Greater than a 1:5 Ratio: add 1/2" (13mm)
- Greater than a 1:6 Ratio: add 5/8" (13mm)
|
