ElectroShade System Electro 1 & 2
Electro 3

Other Products
Double Shades
Bottom Up Shades
DualShade
Sloped Shades

Features
Multi-Band Shades
SnapLoc Spline
Lifetime 25-year warranty

Accessories / Components
Pockets

Blackout Channel
ElectroShade ®<16° Radius Center Support

NOTE: Edge clearances A & B, for angled shades, are determined based on:

1) Regular Roll or Reverse Roll ,
2) Rolled up diameter,
3) Up or down position of the shade, and
4) Angle of the window wall.

The edge clearances shown below for Electro/1 & 2 are at a 8 degree + 8 degree angle off the radius, with a 2-1/2" (64mm) tube and the shade in the full down position. Edge clearance for Electro/3 is based on a 1-3/4" tube.

As the shade rises edge clearances will increase on a Regular Roll shade and decrease on a Reverse Roll shade. The amount of variance will depend on height of the shade and angle. Edge clearance C, for non-angled shades, is unaffected by the above factors.

The following < 16° Radius Center Support brackets use the < 16°Radius Tube Connector & a set of reinforced tube plugs.